4# 6# 8# 10# 1/4" 5/16" M3 M3.5 M4 M5 M6 M8 M10 M12 Z Zinc Plated Cylindrical Flare In Nut Galvanized Self Clinching Nut Carbon Steel Rose Riveting Nut For Sheet Metal

Rose riveting nut is a kind of fastener applied to sheet metal, thin plate, chassis and cabinet. Rising rivet nut has two kinds of shapes: one is hexagonal, which is indicated by NZ, NZS; The other is cylindrical, which is indicated by Z, ZS.The round part of the rose rivete nut pressed into the plate has no inner teeth. Generally, the plate holes are opened in advance on the thin plate, the riveting nut is put into the plate holes, and the part without internal thread is raised from inside to outside with the fixture, so that the riveting nut and the thin plate are closely riveted. The rivet nut is generally not hardened, so as to ensure its toughness, and when the fixture is swollen, it can not only make the component riveted tightly, but also not crack the component. Therefore, when producing, it is very important to choose a good material. The rivet nut is riveted tightly to the sheet, thereby forming an effectively fixed internal thread on the sheet. The rose rivet nuts are divided into two kinds from the material of fast cutting steel rose rivete nuts Z,NZ type and stainless steel rose rivet nuts ZS,NZS type. From the appearance is divided into cylindrical type rivet nuts Z,ZS; Hexagon type rivet nuts NZ,NZS four kinds, respectively used in different use environment. Material: galvanized steel, stainless steel. Models are: Z, ZS, M3, M4, M5, M6, M8, M10, M12, etc., can choose the model according to customer's thickness. Round rivet nuts and hexagonal rivet nuts are widely used in the inlaying process of wall panels of metal sheets, control boxes and power cabinets. The particularity of its structure, when assembling, only need to put the riveting nut into the hole of the metal plate to achieve the "riveting" operation.
Application technical guide
1,The selection of nuts, must be based on the thickness of the plate used, the size range, low carbon steel plate hardness must be less than 70RB, stainless steel plate hardness must be less than 80RB.
2, Free cutting iron nut surface treatment, stainless steel nut to maintain the primary color, users can be ordered according to the table specifications, can also be customized according to need.
3, The plate hole size must be processed according to the tolerance size of 0-+0.075mm, it is recommended to punch.
4, The installation must be achieved by "expansion riveting" operation, can not be installed by tapping.
Application scenarios of rose rivet nuts
Rose rivet nuts are usually used in situations where the height of the fastener is limited and the torque is not high, such as when the installation space is small or when universal riveting tools are not available. It is widely used in the assembly of mechanical and electrical and light industrial products such as automobiles, aviation, instruments, furniture, decoration.